PRO-INNOVATION
Title
SIMCENTER. GUIDELINES TO DEVELOP A MEDICAL SIMULATION CENTER
DOI
https://doi.org/10.19229/978-88-5509-055-1/2182019
Keywords
medical simulation, training, design guidelines, simulation center, simulation network
Abstract
Simulation techniques are an essential tool, to allow learners and operators to develop hard and soft skills simultaneously. Emerging technologies in the field of sensory perception will improve training and emergency management. The combination with virtual reality technologies will allow the development of complex systems, more realistic, allowing an effective and targeted training. They will allow the monitoring of training sessions and the collection of useful data for the generation of a standardized, efficient and unambiguous practice of action. The Design takes on the role of facilitator and manager of the system constituted by the different actors, with the mission to design and indicate the guidelines for setting up an innovative simulation center.
Section
Design | Research & Experimentation
SIMCENTER. Guidelines to develop a medical simulation center
pp. 253-266
Author(s)
Mario Bisson, Alessandro Ianniello, Stefania Palmieri
Author(s) Biography
Mario Bisson, Associate Professor | Design Department of Politecnico di Milano, Italy
Alessandro Ianniello, project researcher at UPO SIMNOVA, Italy
Stefania Palmieri, PhD | Design Department of Politecnico di Milano, Italy
References
Aggarwal, R. et alii (2010), “Training and simulation for patient safety”, in Quality and safety in healthcare, vol. 19, suppl. 2, pp. 34-43.
Bailey, M. et alii (2018), “Framing strategic value through Design-led innovation practice”, in Design 2018 | XV International Design Conference, 24 May, University of Zagabria, Zagabria, pp. 1781-1792.
Dorst, K. and Cross, N. (2001), “Creativity in the design process: co-evolution of problem solution”, in Design Studies, vol. 22, n. 5, pp. 425-437.
Good, M. L. (2003), “Patient simulation for training basic and advanced skills”, in Medical Education, vol. 37, suppl. 1, pp. 14-21.
Ingrassia, P. L. et alii (2014), “Nationwide program for education for undergraduates in the field of disaster medicine: development of a core curriculum centred on blended learning and simulation tools”, in Prehosp Disaster Med, vol. 29, issue 5, pp. 508-515.
Ingrassia, P. L. et alii (2014a), “Virtual reality and live simulation: a comparison between two simulation tools for assessing mass casuality triage skills”, in European Journal of Emergency Medicine, vol. 22, issue 2, pp. 121-127.
Jayavardhana, G. et alii (2013), “Internet of things: a vision, architectural elements and future directions”, in Future generation computer systems, vol. 29, issue 7, pp. 1645-1660.
Manzini, E. (2015), Design when everybody designs, MIT press, Cambridge.
Martin, R. L. (2009), The design of business: why design thinking is the next competitive advantage, Harvard Business Press, Boston.
McGaghie, W. C. et alii (2010), “A critical review of simulation-based medical education research”, in Medical Education, vol. 44, suppl. 1, pp. 50-63.
Mozota, B. B. (2006), “The four powers of Design: a value model in Design Management”, in Design Management review, vol. 17, n. 2, pp. 44-53.
Norman, D. A. and Verganti, R. (2014), “Incremental and radical innovation: Design research vs. technology and meaning change”, in Design Issues, vol. 30, n. 1, pp. 78-96.
Shams, L. and Seitz, A. R. (2008), “Benefits of Multisensory Learning”, in Trends Cognitive Science, vol. 12, issue 11, pp. 411-417.
Yee, J. et alii (2017), Transformations: 7 Roles to Drive Change by Design, BIS Publishers, Amsterdam.
DOI: https://doi.org/10.19229/978-88-5509-055-1/2172019 pp. 239-252
________________________________________________________________________________________________
Arianna Vignati a, Benedetta Terenzi b
a) Researcher | Department of Design of the Politecnico di Milano, Italy
b) Researcher | Department of Civil and Environmental Engineering of the University of Perugia, Italy
Sustainable product-service for children’s soft mobility. Flurry, the indoor-outdoor bike
Design | Research & Experimentation
Abstract
The collaboration between Italtrike, an Italian company producing ride-on toys for children between 1 to 6 years of age, and a group of researchers from the Politecnico di Milano gave rise to the design of a new product system capable of encouraging, promoting and facilitating motricity in preschool children, through play and digital technologies. The modern day challenge is that of responding to the demands of design and innovation generated by digital transformation and not losing sight of the child’s values and needs from the emotional, physical, cognitive and relational perspective. During a Design Laboratory involving a number of researchers from the Politecnico di Milano and expert designers of Design for Kids & Toys, it was possible to delve into the theme of Sustainable Product-Service for Children’s Soft Mobility by developing an innovative product, both on the level of response to children’s specific needs and from a technological point of view.
Keywords
soft mobility, playful experience, phygital product, kid-centred design, product-service for kids
References
Babaglioni, P. (2014), Crescere con lo Sport. Come educare i bambini al movimento per accrescere e sviluppare le loro capacità psicomotorie, Bruno Editore, Roma.
Bird, J. and Edwards, S. (2015), “Children Learning to Use Technologies through Play: A Digital Play Framework”, in British Journal of Educational Technology, vol. 46, issue 6, pp. 1149-1160.
Boccia, P. (2008), Metodi e tematiche nella ricerca socio-psico-pedagogica, M&P edizioni, Bologna.
Bruner, J. S. (1968), Process of cognitive growth: Infancy, Clark University Press, Worcester, Massachusetts.
Burke, A. and Marsh, J. (2013), Children’s Virtual Play Worlds: Culture, Learning and Participation, Peter Lang, New York.
Budde, H., Wegner, M., Soya, H., Voelcker-Rehage, C. and McMorris, T. (2016), “Neuroscience of Exercise: Neuroplasticity and Its Behavioral Consequences Neural Plasticity”, in Neural Plasticity, Editorial, vol. 2016, pp. 1-3.
Calabrese, L. (2001), L’apprendimento motorio tra i cinque e i dieci anni, Armando Editore, Roma.
Canadian Paediatric Society – Digital Health Task Force (2017), “Screen time and young children: Promoting health and development in a digital world”, in Paediatrics and Child Health, vol. 22, issue 8, pp. 461-468.
Cianfanelli, E., Crescenzi, P., Goretti, G. and Terenzi, B. (2019), “Playful Learning for Kids with Special Educational Needs”, in Bagnara, S., Tartaglia, R., Albolino, S., Alexander, T. and Fujita, Y. (eds), Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018): Advances in Intelligent Systems and Computing, vol. 826, Springer, Cham, pp. 732-742.
Diamond, A. (2012), “Activities and programs that improve children’s executive functions”, in Current Directions in Psychological Science, vol. 21, pp. 335-341.
Di Tore, A. and Rajola, G. (2012), “Exergames in motor skill learning”, in Journal of Physical Education and Sport (JPES), vol. 12, issue 3, Art 53, pp. 358-361.
Doyle, A. and Muneer, T. (2017), “Traction energy and battery performance modelling”, in Muneer, T., Mohan Aisling, K. and Doyle, A. (eds), Electric Vehicles: Prospects and Challenges, Elsevier, pp. 93-124.
Elhalwagy, A. M., Ghoneem, M. Y. M. and Elhadidi, M. (2017), “Feasibility Study for Using Piezoelectric Energy Harvesting Floor in Buildings’ Interior Spaces”, in Energy Procedia, Vol. 115, pp. 114-126.
Erickson, K. I., Hillman, C. H. and Kramer, A. F. (2015), “Physical activity, brain, and cognition”, in Current Opinion in Behavioral Sciences, vol. 4, pp. 27-32.
Haapala, E., Poikkeus, A.-M., Tompuri, T., Kukkonen-Harjula, K., Leppänen, P. H., Lindi, V. and Lakka, T. (2014), “Associations of Motor and Cardiovascular Performance with Academic Skills in Children”, in Medicine & Science in Sports & Exercise, vol. 46, issue 5, pp. 1016-1024.
Jäger, K., Schmidt, M., Conzelmann, A. and Roebers, C. M. (2014), “Cognitive and physiological effects of an acute physical activity intervention in elementary school children”, in Frontiers in Psychology, vol. 5, pp. 1-11.
Liaw, S. S. (2008), “Investigating students’ perceived satisfaction, behavioural intention, and effectiveness of e-learning: a case study of the Blackboard system”, in Computers & Education, vol. 51, pp. 864-873.
Malevitis, T., Yalowits, K., Berg, B. and Gonzales, E. (2019), The Internet of Things for Telcos: build from the core to win. [Online] Available at: https://www.accenture.com/_acnmedia/PDF-97/Accenture-The-Internet-of-Things-for-Telcos.pdf#zoom=50 [Accessed 8 January 2019].
Manzini, E. (2015), Design, When Everyone Design, MIT Press, Massachusetts (USA).
Marsh, J. (2014), “Online and Offline Play”, in Burn, A. and Richards, C. (eds), Children’s Games in the New Media Age, Ashgate, Cambridge, pp. 109-312.
Mascheroni, G. and Holloway, D. (eds) (2017), The Internet of Toys: A report on media and social discourses around young children and IoToys, COST Action IS1410 and DigiLitEY. [Online] Available at: http://digilitey.eu/wp-content/uploads/2017/01/IoToys-June-2017-reduced.pdf [Accessed 8 July 2019].
Miyake, A., Friedman, N. P., Emerson, M. J., Witzki, A. H., Howerter, A. and Wagner, T. D. (2000), “The unity and diversity of executive function and their contributions to complex ‘frontal lobe’ tasks: a latent variable analysis”, in Cognitive Psychology, vol. 41, pp. 49-100.
Owen, A. M. (1997), “The functional organization of working memory processes within human lateral frontal cortex: the contribution of functional neuroimaging”, in European Journal of Neuroscience, vol. 9, pp. 1329-1339.
Piaget, J. (1962), Play, dreams, and imitation in childhood, W. W. Norton, New York.
Prensky, M. (2001), “Digital Natives, Digital Immigrants”, in On the Orizon, vol. 9, n. 5, pp. 1-6.
Röder, B. and Hötting, K. (2013), “Beneficial effects of physical exercise on neuroplasticity and cognition”, in Neuroscience and Biobehavioral Reviews, vol. 37, pp. 2243-2257.
Parker, L. E. and Lepper, M. R. (1992), “Effects of fantasy contexts on children’s learning and motivation: Making learning more fun”, in Journal of Personality and Social Psychology, vol. 62, issue 4, pp. 625-633.
Perry, B. D. (1996), “The brain: work in progress”, in The Los Angeles Times, California, October 13, p. 20.
Schon, T. B., Tilley, A. J., Bridges, C. R., Miltenburg, M. B. and Seferos, D. S. (2016), “Bio-Derived Polymers for Sustainable Lithium-Ion Batteries”, in Advanced Function Materials, vol. 26, issue 38, pp. 6896-6903.
Starner, T. and Paradiso, J. A. (2004), “Human generated power for mobile electronics”, in Low Power Electronics Design, vol. 45, pp. 1-35.
Terenzi, B. (2018), “Su Misura? Prospettive del design for kids”, in Chimenz, L., Fagnoni, R. and Spadolini, M. B. (eds), Design su Misura | Atti dell’Assemblea annuale della SID, Società Italiana di Design, Venezia, pp. 229-240.
Verganti, R. (2009), Design-Driven Innovation: Changing the Rules of Competition by Radically Innovating What Things Mean, Harvard Business Press, Boston (MA).
Vignati, A. (2017), “Dall’analogico al digitale”, in Annicchiarico, S. (ed.), Giro Giro Tondo, Electa, Milano, pp 136-169.
Yokota, T., Zalar, P., Kaltenbrunner, M., Jinno, H., Matsuhisa, N., Kitanosako, H., Tachibana, Y., Yukita, W., Koizumi, M. and Someya, T. (2016), “Ultraflexible organic photonic skin”, in Science Advances, vol. 2, n. 4, pp. 1-8.
Zoia, S. (2004), Lo sviluppo motorio del bambino, Carrocci editore, Roma.